TECHNICAL CHARACTERISTICS
Measuring tapes are produced using a special kind of very tough, thin, white waxed paper (41 g/m2); they are printed with printing inks which dry by penetrating the paper, thus ensuring that they are absolutely clean when in contact with fabrics.
All the products used in the production of these measuring tapes meet the international ISO 9002 quality standard.
The measuring tapes have a standard width of 10 mm and contain no inner core, so that when they have been used, there is no waste.
The central hole on which they are hinged has a diameter of 14 mm.
The outside diameter of the tape varies depending on the size requested:
for example, the maximum size possible, that is, 999 metres, has a diameter of about 25 cm.
They are printed as follows:
the marks denoting the units, tens and hundreds of metres are printed in RED and repeated every 20 cm.
The marks denoting centimetres, printed in BLACK to distinguish it from the other information on the tape, are printed every 10 cm. Another black line marks off the 5-cm intervals.
Each tape is marked on the outside with the measurement contained inside so that it can be recognised more easily.
BACK